MIDI Learn and Mapping in SSD5.5

 Mapping and MIDI Learn Section

  • Map: Shows the actual samples that are triggered by the MIDI Note
  • CC: Adjust the MIDI CC value of the MIDI notes
    • Use multiple profiles for different MIDI controllers (eg: MIDI Keyboards, Electronic Drum Kits, Drum Pads, etc)

Hold Control and drag the note from the right hand side column, to left hand column

  • This allows triggering multiple samples from the same keystroke

Right Click the Note to remap it to any other sound or articulation in the kit.

Screen_Shot_2020-03-18_at_8.12.13_AM.png

Change the MIDI CC for things such as E-Kit foot pedals  

Screen_Shot_2020-03-18_at_8.12.22_AM.png

"Save" and "Load" custom or preset maps

  • Located in the bottom right corner of SSD5
  • If you're using mapping for an E-Kit, make sure to check some preinstalled kit maps

    Screen_Shot_2020-03-18_at_8.12.57_AM.png

Use "Set as Default" to save the current mapping as the default map that will open when you load SSD5

  • If you'd like to reset to the factory default, you can click the "Factory Reset" button in the bottom left corner     

    Screen_Shot_2020-03-18_at_8.12.57_AM.png
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.