SSD5 Free Win Installation

Installation

Download the following from the SSD5 Free Page found in https://ssd5-free.dl.drumclassroom.net/:
-SSD5 Free Sampler Win
-Slate Pack 1 & 2
-SSD Install Manager Win 

Double click on the SSD5 Free Installer
-Click "Finish" when the installer has finished.

Double click on the SSD Install Manager
-Follow on screen prompts and click "Finish" when the installation has finished. 

Open SSD Install Manager from your "Desktop" or check on "Run Steven Slate Drums IM" (from the install) and click "INSTALL" on the Steven Slate Drums 5 Full Library
-Select the location path in which your Slate Pack files were downloaded
-Select the location destination in which you'd like your samples to be installed

Click "Install Product", then "FINISH" when the installation is done

Select Base Directory

- When loading an instance of SSD5 for the very first time, the plugin window will be empty. You will need to select the "Base Directory" in order to link the library to the plugin. The Base Directory is your SSD5Library folder. 
- In order to select the "Base Directory", click "Settings" and navigate to your SSD5Library folder. 

IMPORTANT: The path must end in "/SSD5Library" as shown in the image above. Special characters and certain international symbols are not allowed. 
- Next, go to "Construct Kit" and click the Refresh button to populate the plugin library.Screen_Shot_2018-10-24_at_10.44.42_AM.png
Select_Base_Directory__SSD5_.png

SSD5 Free is ready to use!

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.